Requirement
State what the complete solution must achieve for bulk presentation using electrical-contact orientation and feeding, including your production pattern and who will review the result.
Component feeding and sortation
Electrical Contact Feeders Specification Checklist
Use this practical checklist to describe your requirements for electrical contact feeders around representative components, bulk condition and the downstream interface, line connections and required results.
A useful specification for electrical contact feeders describes your operating range, line connections and required results while leaving room for the supplier to propose the best method.
Use this checklist for bulk presentation using electrical-contact orientation and feeding and separate confirmed facts, realistic ranges and items that need a trial.
On the production floor
Describe what the complete process needs to achieve — Electrical Contact Feeders
Plan electrical contact feeders around real component variation, bulk condition, orientation, usable delivery rate and the downstream interface. Discuss representative part trials with Sorting Solutions. A clear brief should state the operating range for component geometry and variation for electrical-contact orientation & feeding and your requirements for jam, damage and recovery acceptance checks.
Discuss your application
Your checklist
Application, operation and results
Product, part or pack
Operation and interfaces
Results and support
Write measurable requirements
For Electrical Contact Feeders, turn each checklist item into a range and a test
Range
Record normal and credible extremes for component geometry and variation for electrical-contact orientation & feeding, surface, fragility and entanglement behaviour and bulk condition and replenishment method; avoid relying on one nominal value.
Check
Define representative examples from bulk presentation using electrical-contact orientation and feeding, the method, repetitions, acceptable range and result record so you and the supplier share the same expectation.
For electrical contact feeders, use “shall” only for a requirement that can be demonstrated. Keep preferences, assumptions, provisional line connections and future options clearly separate.
Connected responsibilities
Be clear about what sits around your electrical contact feeders
Your final electrical contact feeders scope must also account for escapement and downstream pick interface, jam, damage and recovery acceptance checks, current regulations and the conditions at your site.
- Sample trials must include normal, marginal and supplier-variant components.
- Quoted feeder output is not the same as usable delivery at the downstream process.
- Fragile, flexible, magnetic or entangling parts may need a different presentation method.